Wohlers Report

Wohlers Report 2013

Additive Manufacturing and 3D Printing State of the Industry
Annual Worldwide Progress Report

Development Team

The following 75 individuals and organizations contributed to Wohlers Report 2013 and served as important sources for information.

Nadra Angerman Angerman Communications Group U.S.
Mukesh Agarwala 3D Product Development India
Paulo Jorge Bártolo Institute Polytechnic of Leiria Portugal
Joseph Beaman, Jr. University of Texas at Austin U.S.
Josh Berman William Blair & Company U.S.
Alain Bernard Ecole Centrale de Nantes France
Craig Blue Oak Ridge National Laboratory U.S.
Milan Brandt RMIT University Australia
Craig Brice NASA Langley Research Center U.S.
David Bourell University of Texas at Austin U.S.
Ian Campbell Loughborough University England
William Cass Cantor Colburn U.S.
Andy Christensen Medical Modeling U.S.
Shane Collins Oxford Performance Materials U.S.
Mel Cossette Edmonds Community College U.S.
Frank Cox Edmonds Community College U.S.
Deon de Beer Vaal University of Technology South Africa
Carl Dekker Met-L-Flo U.S.
Olaf Diegel Massey University New Zealand
Brian Drab William Blair & Company U.S.
Igor Drstvenšek University of Maribor Slovenia
Sara Ebright Direct Dimensions U.S.
Pablo Elenter Robtec Brazil
Claus Emmelmann LZN Laser Zentrum Nord Germany
Ismail Fidan Tennessee Tech University U.S.
Tim Gornet University of Louisville U.S.
Joan Guasch Ascamm Spain
Ola Harrysson North Carolina State University U.S.
Seiji Hayano Aspect Japan
Ed Herderick EWI U.S.
Dirk Herzog LZN Laser Zentrum Nord Germany
Forrest Higgs Brosis Innovations U.S.
Neil Hopkinson University of Sheffield England
Luca Iuliano Politecnico di Torino Italy
Jason Jones De Montfort University England
Volker Junior Junior & Tacke Germany
Karolien Kempen Katholieke Universiteit Leuven Belgium
Eric Klemp Direct Manufacturing Research Center Germany
Jannis Kranz LZN Laser Zentrum Nord Germany
Janet Krech Wohlers Associates U.S.
Jean-Pierre Kruth Katholieke Universiteit Leuven Belgium
Tom Kurfess Georgia Institute of Technology U.S.
Feng Lin Tsinghua University China
Ulf Lindhe netfabb Germany
Blake Marshall U.S. Department of Energy U.S.
Wilhelm Meiners Fraunhofer Institute for Laser Technology Germany
Jorge Mireles University of Texas at El Paso U.S.
Ed Morris National Additive Manufacturing Innovation Institute U.S.
Greg Morris GE Aviation U.S.
Tim Mulrooney William Blair & Company U.S.
Erkut Neğiş TurkCADCAM Turkey
Randall Newton Jon Peddie Research U.S.
John Obielodan University of Wisconsin–Platteville U.S.
Charles Overy LGM U.S.
Joris Peels Voxelfab Netherlands
Michael Raphael Direct Dimensions U.S.
Phil Reeves Econolyst England
Alex Rekout Moscow Business College #11 Russia
Stephen Rouse Medical Applications of Additive Manufacturing U.S.
Jeff Rowe Cairowest Group U.S.
Kevin Scanlan Anubis Manufacturing Consultants Corp. Canada
Joel Segal University of Nottingham England
Michael Siemer Innovative Medical Device Solutions U.S.
Chris Spadaccini Lawrence Livermore National Laboratory U.S.
Jürgen Stampfl Vienna University of Technology Austria
Ian Stewart Wilson Elser Moskowitz Edelman & Dicker U.S.
Brent Stucker University of Louisville U.S.
Jukka Tuomi Aalto University Finland
Bart van de Vorst TNO Netherlands
Juan Vargas University of Texas at El Paso U.S.
Marius Vermeulen Aerosud South Africa
Andreas Wegner University of Duisburg–Essen Germany
Ryan Wicker University of Texas at El Paso U.S.
David Wimpenny Manufacturing Technology Centre England
Gerd Witt University of Duisburg–Essen Germany

Order form and table of contents. Order your report today!